What to do for basic electrical problems with the electric supply of my Graco Paint Sprayer?
If you're facing basic electrical problems with your Graco Paint Sprayer, reset the building circuit breaker, replace the building fuse, or try another outlet.
What to do if my Graco Paint Sprayer has low output due to electric supply issues?
If you're experiencing low output with your Graco Paint Sprayer, with electric supply with volt meter, reset the building circuit breaker, replace the building fuse, or repair the electrical outlet or try another one.
How to fix electrical problems with my Graco Paint Sprayer related to the extension cord?
If you're experiencing basic electrical problems with your Graco Paint Sprayer due to the extension cord, replace the extension cord.
What to do if the building circuit breaker opens when I turn on my Graco Ultra 395?
If the building circuit breaker opens as soon as you turn on your Graco Paint Sprayer, inspect all electrical wiring for damaged insulation and all terminals for loose fit or damage. Repair or replace any damaged wiring or terminals and securely reconnect all wires.
Why is the motor on my Graco Paint Sprayer hot and running intermittently?
If your Graco Paint Sprayer's motor is hot and runs intermittently, it might be due to operating at high pressure with small tips. Try decreasing the pressure setting or increasing the tip size.
What to do if the motor runs but the pump doesn't stroke on my Graco Paint Sprayer?
If the motor runs but the pump does not stroke on your Graco Paint Sprayer, it could be due to a damaged or missing displacement pump pin. Replace the pump pin if it's missing and ensure the retainer spring is fully in the groove all around the connecting rod.
What to do if my Graco Paint Sprayer has low output because of a worn spray tip?
If you experience low output from your Graco Paint Sprayer, and suspect a worn spray tip, relieve the pressure and then replace the tip.
What to do if my Graco Paint Sprayer has low output and the filter is clogged?
If you're experiencing low output from your Graco Paint Sprayer, the filter may be clogged. Relieve the pressure and then check and clean the filter.
What to do if my Graco Paint Sprayer has low output because of a leaking prime valve?
If you notice low output from your Graco Paint Sprayer, and the prime valve is leaking, relieve the pressure and repair the prime valve.
How to troubleshoot basic fluid pressure problems with my Graco Ultra 395 Paint Sprayer?
If you have basic fluid pressure problems with your Graco Paint Sprayer, slowly increase the pressure to see if the motor starts. Alternatively, relieve the pressure and clear any clogs, or clean the filter.
Read all warnings and instructions in this manual. Save these instructions.
Precautions to prevent fire and explosion from flammable fumes.
Risks and prevention methods for electric shock during operation.
Dangers of high-pressure fluid injection and required immediate treatment.
Consequences of improper use of the equipment and related safety.
Hazards associated with specific solvents and aluminum parts.
Risks from exposure to toxic fluids or fumes and necessary precautions.
Required PPE for safe operation and servicing of the equipment.
Information regarding chemicals known to cause cancer or reproductive harm.
Steps to clear a clogged spray tip or hose. Includes safety precautions.
Basic operation steps for digital display models, including pressure settings.
Accessing and understanding stored operational data like motor run time and error codes.
Navigating the primary menus for digital display units.
Accessing secondary functions and error codes on digital displays.
Procedure to modify pressure and volume units on digital displays.
Contact information, website, and product support details from Graco.
General| Maximum Operating Pressure | 3300 PSI |
|---|---|
| Hose Length | 50 ft |
| Power Source | Electric |
| Voltage | 120V |
| Motor | DC Motor |
To Next Page