EasyManua.ls Logo

Graco 238377 - User Manual

Graco 238377
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
308613E
ENG
Instructions
Single Acting and Double Acting Paint Spray Guns for
RoadLazer
RoadPak
Line Striping System
- For the application of road marking paints and coatings -
- For professional use only -
Model: 238377 (Single-acting gun)
Model: 24G980 (Double-acting gun)
Maximum Working Pressure 3000 psi (21 MPa, 210 bar)
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
ti16339a
05952b
238377
24G980
II 2 G
T5

Other manuals for Graco 238377

Questions and Answers

  • C
    Carrie BlairAug 10, 2025
    What to do if my Graco 238377 Paint Sprayer gun will not spray?
    • S
      shermankevinAug 10, 2025
      If your Graco Paint Sprayer gun isn't spraying, several factors could be at play. First, ensure the pump is operating correctly; refer to the pump manual for guidance. Check for and clear any clogs in the fluid line. Verify that the fluid valve is open. Clean any clogs present in the orifice or needle seat. Inspect and clean the air lines to ensure proper trigger or actuator air pressure. Lastly, replace worn or dry piston packings.
  • L
    Lauren MayAug 25, 2025
    Why does my Graco 238377 gun keep spraying?
    • A
      amurrayAug 25, 2025
      If your Graco Paint Sprayer gun continues to spray, it could be due to several reasons. The fluid pressure might be too high; try reducing the pressure to the pump or adjusting the fluid pressure regulator. The fluid needle could be binding, requiring cleaning or repair. Alternatively, the piston packing might be binding and need repair, or the needle seat could be obstructed or worn, necessitating cleaning or replacement.

Graco 238377 Specifications

General IconGeneral
Model238377
Product TypeAirless Paint Sprayer
Maximum Pressure3000 PSI
Hose Length50 ft
Power SourceElectric
Voltage120V
Tip Size0.015 inches

Related product manuals