EasyManua.ls Logo

Graco 237526 - User Manual

Graco 237526
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
308485R
EN
Instructions - Parts List
3:1 Fire-Ball
®
425 Pump
For pumping non-corrosive and non-abrasive oils and lubricants. For professional use
only.
Not approved for use in European explosive atmosphere locations.
Model 237526, Series B
540 psi (3.7 MPa, 37 bar) Maximum Working Pressure
180 psi (1.2 MPA, 12 bar) Maximum Air Input Pressure
Related Manuals
Important Safety Instructions
Read all warnings and instructions in this
manual before using the equipment.
Save these instructions.
Manual in
English
Description
308201 Pump Runaway Valve

Table of Contents

Questions and Answers

  • K
    kfreemanSep 6, 2025
    Why Graco 237526 fails to operate?
    • W
      William TurnerSep 6, 2025
      Your Graco Water Pump might fail to operate due to several reasons. It could be due to inadequate air supply pressure or restricted air lines, in which case you should increase air supply and clear any obstructions. Other potential causes include closed or clogged valves (open and clean them), clogged fluid lines, hoses, valves, etc. (clear them). A damaged air motor (service the air motor) or an exhausted fluid supply (refill and reprime, or flush) could also be the reason.
  • W
    William ThompsonSep 7, 2025
    What to do if Graco Water Pump has continuous air exhaust?
    • K
      Kimberly ScottSep 7, 2025
      If your Graco Water Pump has continuous air exhaust, it is likely due to a worn or damaged air motor gasket, packing, or seal. To resolve this, service the air motor.

Graco 237526 Specifications

General IconGeneral
BrandGraco
Model237526
CategoryWater Pump
LanguageEnglish

Related product manuals