Graco 24S134 - User Manual

3A3373C
EN
Operation, Parts
Texture Spray Gun
For water-Based Materials Only.
Model: 24S134, 24S135, 24S155 non-bleeder, use with RTX Texture Sprayers
125 psi (8.6 bar, 0.86 MPa) Maximum Air/Fluid Working Pressure
Model: 248093 bleeder, use with GTX Texture Sprayers
125 psi (8.6 bar, 0.86 MPa) Maximum Air/Fluid Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual and related manuals.
Be familiar with the controls and the proper usage of the equipment.
Save these instructions.
ti28084a
Use only genuine Graco replacement parts.
The use of non-Graco replacement parts may void warranty.
www.graco.com/techsupport
?? ??

Graco 24S134 Specifications

General

Model	24S134
Power Source	Electric
Hose Length	50 ft
Voltage	120V
Type	Airless
Flow Rate	0.47 GPM
Weight	34 lbs
Maximum Fluid Temperature	120 °F (49 °C)

Summary

Warnings

Equipment Misuse Hazard

Misuse can cause death or serious injury. Follow safety guidelines for operation.

Skin Injection Hazard

High-pressure fluid can pierce skin, causing serious injury or amputation. Seek immediate treatment.

Plastic Parts Cleaning Solvent Hazard

Personal Protective Equipment

Component Identification

Setup

Pressure Relief Procedure

Procedure to relieve pressure before cleaning, checking, or servicing equipment.

Spray Disc and Nozzle Selection

Gun Adjustments

Preventing Material Surge

Shutdown and Cleanup

Repair

Fluid Seal Replacement

Air Seal Replacement

Troubleshooting

24 S134, 24 S135, 24 S155, 248093 Gun Parts List