Repair
334654B 5
4. Disengage trigger lock.
5. Hold a metal part of the gun firmly to a
grounded metal pail. Trigger the gun to
relieve pressure.
Solvent and oil-based fluids: follow
local code. Use only conductive metal
pails, placed on a grounded surface
such as concrete.
Do not place pail on a non-conductive
surface such as paper or cardboard
which interrupts grounding continuity.
6. Engage trigger lock.
7. Open any fluid drain valves in system.
Leave drain valves open until ready to
spray again.
To Next Page
Loading...
Need help?
General
