Need help?Do you have a question about the Graco DuoLogic2 and is the answer not in the manual?
General| Category | Car Seat |
|---|---|
| Brand | Graco |
| Model | DuoLogic2 |
| Forward-Facing Weight Limit | 22-65 lbs |
| Side Impact Protection | Yes |
| Type | Convertible |
| Height Range | Up to 49 inches |
| Installation | LATCH or seat belt |
| Harness Type | 5-point harness |
| Warranty | 1 year |
Extend harness, place child, then secure harness straps into the lock with a click.
Locate ISOFIX mounts, slide base forward, and push towards mounts until a 'click' is heard.
Ensure indicators show green on both sides, confirming base is securely locked with ISOFIX.
Push base firmly against seat back until it locks with an audible 'click'.
Place seat on base, push down until it clicks, and verify indicator shows green.
Check harness tightness and safety indicator; ensure seat is securely locked.
To Next Page