Graco GMax ll 5900 - Page 26

Cleanup
26 310892B
9 Hold gun against paint pail.
Take trigger safety OFF.
Turn pressure control up
until motor begins to drive
pump. Trigger gun until
flushing fluid appears.
10 Move gun to flushing pail,
hold gun against pail, trig-
ger gun to thoroughly flush
system.
Release trigger and put
trigger safety ON.
11 Turn prime valve down and
allow flushing fluid to circu-
late for approximately 20
seconds to clean drain
tube.
12 Raise siphon tube above
flushing fluid and run
sprayer for 15 to 30 sec-
onds to drain fluid. Turn
pump switch OFF. Turn
engine OFF.
3$,17
WLD
)/86+
WLD
6(&
WLD
3$,17
)/86+
WLD
WLD
/&&
WLE
2))
/&&
/.