38
a
1
2
c
1
2
OPERATIONS & ADJUSTMENTS
(continued)
1. Pull out on recline handle on front
of child restraint, while pulling up and
forward (a).
2. Adjust recline to position
2 or 3 as
indicated on label (b) on side of base.
To reach most upright position (c), pull
out on the handle and push straight back
until the seat clicks into the upright
position. If you change recline positions
you will need to re-check installation to
make sure belt is tight.
Forward-Facing
b
Recline / Upright Positions
To Next Page
Loading...
Need help?
General