Models
311238ZAM 3
Models
Air Motor Part No. Matrix
Check your motor’s identification plate (ID) for the 6-digit part number of your motor. Use the
following matrix to define the construction of your motor, based on the six digits. For exam-
ple, Motor Part No. N65DT0 represents an NXT motor (N), 6500 cc per stroke (6 5), with
de-icing exhaust (D) and DataTrak monitoring (T). The last digit (0) is unassigned.
N6 5 D T 0
First Digit
(Motor)
Second and Third Digits
(motor size in cc per stroke)
Fourth Digit
(Exhaust Type)
Fifth Digit
(Data Monitoring)
Sixth Digit
(unassigned)
N (NXT
Air Motor)
65 6500 D De-icing N None 0 None
assigned
34 3400 L Low noise T DataTrak 2
22 2200 R Remote exhaust
(see note below)
R Remote DataTrak
H Linear Sensor
Remote exhaust models have a 1 in. npt(f) exhaust
outlet, allowing installation of a muffler or plumbing
to route exhaust to a remote location.
Remote DataTrak models do not have the Data-
Trak display on the motor. An external plug con-
nects to systems using a remote display interface.
See pages 38-39 for parts.
Do not operate the remote exhaust air motor without a
plumbed exhaust line or muffler installed.
To Next Page
Loading...
Need help?
General