Technical Data
44 311238ZAM
Technical Data
Santoprene
®
is a registered trademark of the Monsanto Company.
NXT Air Motor
US Metric
Maximum air inlet pressure 100 psi 0.7 MPa, 7.0 bar
Air motor piston diameter
NXT Model 6500: 10.375 in. 264 mm
NXT Model 3400: 7.5 in. 191 mm
NXT Model 2200: 6.0 in. 152 mm
Stroke length 4.75 in. 120 mm
Air Inlet Size 3/4 npt(f)
Remote exhaust outlet size (remote models only) 1 in. npt(f)
Maximum motor speed
(Do not exceed maximum recommended speed of fluid pump, to prevent premature pump wear)
60 cycles per minute
Operating temperature range 32-140°F 0-60°C
Materials of construction Aluminum, ductile iron, stainless steel, carbon steel, acetal,
polyethylene, Santoprene
®
, alloy steel, polypropylene
Seals and packings Nitrile rubber
Weight
NXT Model 6500: 69 lb 31 kg
NXT Model 3400: 50 lb 23 kg
NXT Model 2200: 46 lb 21 kg
TI9239A
1
9
7
Pin-Out Information for Motor with Linear Sensor
Pin
Description
1 5V Common
2 Voltage Out
3 +5V Supply
4 Shield
5 Extend High Pin
6Retract High Pin
7 Bottom SW Signal
8 Top SW Signal
9 Common
Pin-Out Information for Motor with Remote DataTrak Connector
Pin
Description
1 Bottom SW Signal
2 Top SW Signal
3Common
4Shield
TI10950A
1
23
4
To Next Page
Loading...
