51
16.0 Adjusting Head Support
When using with or without the built-in
harness.
BEFORE adjusting the head support height,
have your child lean forward slightly.
Squeeze the red adjustment handle
on
top of seat and pull back support up until it
snaps into one of the 5 height positions.
To lower, squeeze red adjustment handle
and push down.
CHECK to make sure it is securely snapped
into one of the 5 height positions by pulling
up on head support.
The shoulder belt guides should be even
with or just above the shoulders as shown
by dotted line
Ë.
Ë
To Next Page
Loading...
