Graco NAUTILUS - Storing UAS and Tether

60
19.1 Storing UAS and Tether
1. For ease of storing, extend UAS to its
maximum length.
2. Locate the storage bars on back of
child restraint.
3. Fasten ends of tether  and UAS Ë onto
their respective storage bars as shown.
4. Tether and UAS storage should look like
this when complete.

Storage bars located
on each side at the
back of the seat
Tether
UAS
anchors
UAS
anchors
Ë

Ë
Ë