29
5. To create a secure installation, while
pushing down on the base, pull the free
end of the lap belt or the shoulder portion
of the lap/shoulder belt to tighten
.
6. Close lock-off over lap belt AND free end of the
lap/shoulder belt .
NEVER allow any object other than the vehicle
belts to go under or interfere with the lock-off.
If any other part of the vehicle belt interferes
with the lock-off choose another seating location.
MAKE SURE that you push the top of the
lock-off all the way down.
7. Check that belt does not move by pulling
and pushing hard on base with hands near the
vehicle belt path. If belt loosens
or lengthens, repeat procedure.
8. Push the child restraint down into the base and
make sure that you hear a “click” . Pull up on
the child restraint to be sure it
is latched securely into the base.
If the child restraint does not securely latch
into the base, the child restraint provides NO
protection for your child. DO NOT use the child
restraint/base if the child restraint does not
securely latch into the base.
9. Test child restraint for secure
installation as described in infant
restraint “Final Safety Check” page 41.
To Next Page
Loading...
Need help?
General