28
Belts MUST go
under lock-off
Lap Belt Lap/Shoulder
Belt
1. Make sure vehicle is on level ground in order to
get the correct recline position.
2. Place the base in a rear-facing position
on a forward-facing vehicle seat.
3. Push recline adjustment buttons
and slide
into position 1 to access lock-off.
4. When using the base to install the infant
restraint, the lock-off is ALWAYS used to
secure both belts of the lap or lap/shoulder
belt.
Open the lock-off and route the vehicle
belt through the vehicle belt path and over the
lock-off
. Buckle the vehicle belt.
Lock-off
6.2 Installing the Child Restraint and
Base Using Vehicle Belt
To Next Page
Loading...
