Graco Ultra User Manual

For portable spray applications of water-based and oil-based
non-flammable architectural paints and coatings only.
Not approved for use in explosive atmospheres or hazardous locations.
3A4476E
EN
Important Safety Instructions
Read all warnings and instructions in this manual, on the unit, and in the battery and
charger manual. Be familiar with the controls and the proper usage of the equipment.
Save these instructions.
FIRE AND EXPLOSION HAZARD
Use only non-flammable or water-based materials, or
non-flammable paint thinners. Do not use materials
having flash points below 100°F (38°C). This includes,
but is not limited to, acetone, xylene, toluene, and
naphtha. For more information about your material,
request Safety Data Sheet (SDS) from the supplier.
Use oil-based materials outdoors or in a well-ventilated
indoor area with a flow of fresh air.
Spraying certain materials may cause static build-up in
the sprayer that can result in static shock to the user. If
this occurs, the material likely contains a flammable
solvent that can build up static and result in a fire or
explosion. Switch to an alternative material.
Operation, Parts
Cordless HandHeld
Airless Sprayers
Operational video.
http://graco.com/hhsupport
844-241-9499

Graco Ultra Specifications

General

Brand	Graco
Model	Ultra
Category	Paint Sprayer
Language	English

Summary

Important Safety Instructions

Important User Information

Warnings

Fire and Explosion Hazard

Safety warnings and precautions for preventing fire and explosion.

Skin Injection Hazard

Warnings and procedures to prevent serious injury from skin injection.

Equipment Misuse Hazard

Safety guidelines to prevent injury or death from improper equipment use.

Battery and Charger Compatibility Hazard

Precautions regarding the use of DEWALT batteries and chargers with the tool.

Pressurized Aluminum Parts Hazard

Warnings about fluid incompatibility with aluminum parts causing rupture.

Toxic Fluid or Fumes Hazard

Hazards associated with toxic fluids or fumes and necessary precautions.

Personal Protective Equipment

Recommended protective gear to prevent injury in the work area.

Start Up

Pressure Relief Procedure

Procedure to relieve pressure before maintenance or servicing the sprayer.

Starting a New Job

How to Spray

Clear Tip Clog

Cleanup

Cleaning Sprayer

Storage

Common Procedures

Reference

Static Grounding Instructions (Oil-Based materials)

Safety instructions for grounding equipment when using oil-based materials.

Maintenance

Replacement Parts

Troubleshooting

Sprayer Diagnostics

Spray Pattern Diagnostics