To Next PageTo Next PageWhat to do if fluid is leaking past the packings on my Graco Paint Sprayer?
If fluid is leaking past the packings in your Graco Paint Sprayer, first tighten the packing screw if it's loose. If the leak persists, replace any worn or damaged packings or the needle as necessary.
General| Brand | Graco |
|---|---|
| Model | Series A |
| Category | Paint Sprayer |
| Language | English |
System must include a bleed-type master air valve and a fluid drain valve for safety.
Ensuring proper grounding continuity for the entire spray system.
Step-by-step guide to safely relieve fluid pressure in the spray system.
Instructions for locking and unlocking the gun's safety knob.
Adjusting the spray pattern by orienting the tip guard.
Procedure for modifying the trigger's tension.
Daily lubrication requirements for gun components.
Steps to resolve a clogged spray tip.
Procedure for flushing the gun after use.
Identifying and resolving common operational problems.
Detailed instructions for needle adjustment for proper function.
Exploded view and torque specs for the swivel kit.
Guide for replacing key internal components like packing and seals.
Exploded view illustration of gun components with reference numbers.
Detailed list of part numbers, descriptions, and quantities for each model.
Key technical specifications including pressure, orifice size, and sound.
Information regarding warranty terms, limitations, and disclaimers.
