Graco X5 User Manual

Maintenance
3A3208B 31
Pump Installation
1. Slide pump assembly onto the mounting
pins.
a. Move pump rod up or down until cap
is level with the opening in the yoke.
b. Push on pump rod to slide pump
assembly back on to mounting pins.
2. Swing easy access door closed while
pushing the entire door towards the inlet
end of the pump.
3. Install hopper if it was removed and any
hoses removed earlier.
4. Plug sprayer into power source.
NOTE: Door must be fully closed and
latched before sprayer will operate.
ti27036a
ti27037a
1
ti27478a
2
3

Graco X5 Specifications

General

Type	Airless Paint Sprayer
Maximum Hose Length	75 ft
Maximum Pressure	3000 PSI
Weight	15 lbs
Flow Rate	0.27 GPM
Recommended Annual Use	125 gallons per year
Hose Length	25 ft
Power Source	Electric
Voltage	120 V
Tip Size	0.015 in
Maximum Tip Size	0.015 inch