DE
EN
FR
NL
IT
SV
ES
NO
DK
RU
PL
UK
HU
REQUIREMENTS ON THE INSTALLATION LOCATION
For safe and fault free operation of the unit, the following requirements of the installation loca-
tion have to be met:
● The unit has to be placed on a solid, flat, horizontal, and non-slipping surface with a suffici-
ent weight-carrying capacity.
● Make sure that the unit cannot topple over.
● Choose the location in such a way that children cannot reach the blade of the unit or the
supply lines.
● Never use the unit outdoors, and always keep it in a dry place.
● The unit is not designed for installation in a wall or a built-in cupboard.
● Do not set up the unit in a hot, wet or moist environment.
● The socket has to be easily accessible so that the power cable can be removed easily in
case of emergency.
● If the connecting cable is too long, you can adjust it to the required length using the cable
winder.
PRIOR TO FIRST USE
CAUTION!
Danger of injury !
The very sharp blade can cause injuries.
● Proceed with caution when wiping the blade.
BASIC CLEANING
The unit , but especially the blade, must be wiped with a damp cloth before first use to remove
any production residues. Also refer to the chapter on “Cleaning and maintenance”.
INITIAL OPERATION
WARNING!
Danger of injury !
The very sharp blade can cut off body parts. Especially your fingers and thumbs are at risk.
● For this reason, do not reach into the space between the stop plate and the blade as long
as the stop plate is not closed completely, i.e. set to “0”.
● Do not touch the blade with your fingers.
33
To Next Page
Loading...
