Graef MYtiny - Removal and Cleaning the Slide; Removing, Cleaning and Greasing the Blade

REMOVAL AND CLEANING THE SLIDE
The carriage can be removed from the unit to make it easier to clean.
● Push the slide release outwards.
● Remove the slide.
● Clean the slide with a damp cloth or under
running water. Use a mild detergent in case
of heavy soiling.
● Once a month, add some drops of resin-free
oil or petroleum jelly to the slideway.
● Remove excess oil or petroleum jelly with a
soft cotton cloth.
● Once the cleaning process is completed, place the slide back on the slideway.
● Push the slide release inwards again.
REMOVING, CLEANING AND GREASING THE BLADE
CAUTION!
Sharp blade !
Proceed with caution when wiping the blade.
● Pull the slide towards yourself.
● Press lightly on the centre of the blade screw to raise the integrated folding handle slightly.
Open the folding handle completely.
● Use the folding handle to loosen the blade by turning the blade screw clockwise and care-
fully removing the blade.
1. 2.
40