12
Remove dust and threads from the
compressor compartment at the back
of the refrigerator/freezer with a
vacuum cleaner. Restart the
refrigerating compartment by pressing
the upper button (1).
GB
15
Warning
It is dangerous to use electrical apparatus,
knives or sharp objects to accelerate
defrost.
Cleaning
Stop the refrigeration compressor by
pressing the upper button
(1)
and disconnect the power supply to the
refrigerator/freezer.
The cabinet is best cleaned using a
weak soap solution and a soft cloth.
Never use cleaning agents that scour.
Clean the sealing strip around the
door regularly to prolong its life. Use
only clean water for cleaning the
sealing strip.
The plastic parts of the cabinet cannot
withstand boiling water (max. 85°C). It
is important to prevent water from
getting into the control panel.
Clean the melt water drain in the
refrigerating compartment using the
cleaning pin supplied (15).
Cleaning of doors in
stainless steel or aluminium
Stainless steel or aluminium doors on
GRAM products can, with advantage,
be cleaned with a spray and a soft
cloth. There are a number of different
spraying agents for this purpose on
the market. We recommend that you
contact your usual white goods
supplier for advise on the advantages
and disadvantages of the individual
products. However, we would point out
that GRAM has good experience with
the following cleaning agents:
For stainless steel products:
· Inox Plejespray from Würth or
Steel Clean
· Precision Degreasing Solvent
292 or Metal Surface
Degreaser 277 – both from
Chesterton.
For aluminium products
· Precision Degreasing Solvent
292 or Metal Surface
Degreaser 277 – both from
Chesterton.
Chesterton products can be purchased
through www.chesterton.com
To Next Page
Loading...
Need help?
General
