7
GB
Using the refrigerator/freezer
Electronic control
The refrigerator/freezer is equipped with
electronic control. The control panel is
concealed behind the refrigerator door.
The appliance has been factory-set to
operate at optimum temperature, i.e. +5°C
in the refrigerating compartment and -
18°C in the freezing compartment. If you
wish to change the preset temperatures,
the new settings will be stored in the
electronic control. In case of power failure,
the control will remember the latest
settings when power to the cabinet is
restored.
The electronic control has
the following functions:
· On/off function
· Display of actual temperature in
refrigerating and freezing
compartments.
· Setting temperatures in
refrigerating and freezing
compartments
· Automatic defrosting of
refrigerating compartment
· Quick freeze
· Acoustic and visual alarms
· Emergency program in case of
sensor fault
· Service program (not accessible
to user)
· Light-emitting diodes
· Power-saving sensors
1. On/off button
2. Green light-emitting diode
indicating that the refrigerating
compartment is switched on
3. Blue light-emitting diode
indicating that the freezing-
compartment is switched on
4. Button for displaying and setting
temperature in freezing
compartment
5. Button for displaying and setting
temperature in refrigerating
compartment
6. Display showing set and actual
temperatures in refrigerator or
freezer
7. Button for step-by-step
temperature regulation upwards
8. Button for step-by-step
temperature regulation
downwards
9. „Quick freeze” button
10. Blue light-emitting diode
showing that ”Quick freeze” is
active.
1
1
2
3
4
5
6
7
8
9
10