765041477 Rev 000 31
Because of the heavy weight of the cabinet, the floor might be damaged or
scratched when moving the cabinet.
Correct set up gives the most effective operation.
The cabinet should be located in a dry and adequately ventilated room.
To ensure efficient operation, it may not be placed in direct sunlight or against
heat-emitting surfaces. The cabinet is designed to operate in an ambient
temperature of up to +32°C.
Avoid placement of the cabinet in a chlorine/acid-containing environment
(swimming bath etc.) due to risk of corrosion.
The cabinet and parts of the interior is equipped with a protecting film, which
should be removed before use.
Clean the cabinet with a mild soap solution before use.
The set up place must be level and horizontal.
For versions with legs, use the adjustable legs to make sure that the cabinet stands
level and upright.
Fig.2
For versions with castors, the locking devices of the two front castors must be activated,
when the cabinet is in place. The base must be level, and the cabinet may not be placed
on frames or the like.
Fig. 3
To Next Page
Loading...
Need help?
General
