765041477 Rev 000 34
Electrical connection
Read the text below thoroughly before electrical connection.
The cabinet is intended for connection to alternating current. The connection
voltage (V) and frequency (Hz) are shown on the name plate in the cabinet (see
Fig. 9). Only the supplied detachable cord is to be used (see Fig. 6).
Never use an extension cord for this appliance!
If a wall socket is placed in a longer distance than the length of the supplied power
cord, contact an electrician to establish a wall socket within the range of the
supplied power cord.
If the cabinet is defective, the cabinet must be examined by a service electrician
from Gram Commercial or an authorised refrigeration company with knowledge of
Gram’s products.
Connecting the detachable powercord:
Fig. 6
To Next Page
Loading...
Need help?
General
