Grammer MSG95EAC - Page 54

Repair manual GRAMMER seat suspension MSG95EAC – November 2012
Material no. 1 277 338
3.13 Active module – removal and installation
Page 2 of 2
10 Pull off the quick-release fastener
screw (13) at the air hose (11).
Installation notes:
• Pull off the existing protective cap
(15) at the quick-release fastener
screw (13) which is preassembled at
the new active module (1).
• Insert the air hose (11) into the
quick-release fastener screw (13) as
far as possible, then pull it back
approx. 1 mm.
• Quick-release fastener screw, 5 Nm
11 Remove the active module (1).
12 Re-install the components in the
reverse order of their removal.
2869
11
11
13
14
9
5
9
11101241
8
15
13
13
6
7
2
11
3
3
9
9
8
7
6
5
1
4
3
10
2