Need help?Do you have a question about the Grammer MSG95G/721 and is the answer not in the manual?
Essential safety guidelines for using the driver's seat, including warnings and precautions to prevent injury.
Adjust the seat for the driver's weight using the actuator lever and indicator for proper seating and health.
Modify the seat height by operating the adjustment lever, ensuring the green marking is visible for correct setting.
Activate the fore/aft isolator to absorb impacts in the driving direction, improving comfort and safety.
Adjust the seat's fore/aft position by lifting the locking lever; do not operate while driving.
Adjust the seat pan angle by pulling the left handle upwards and positioning the seat pan.
Adjust the seat cushion depth by pulling the right handle upwards to achieve the desired seating position.
Modify the inclination of the armrests by turning the adjustment knob for personalized comfort.
Fold up and adjust the height of the armrests by loosening the hexagon nut and tightening it after adjustment.
Adjust armrest vertical, longitudinal direction, and inclination using the hand wheel.
Adjust the backrest extension height by pulling it upwards over increments; pull beyond the end stop to remove.
Adjust lumbar support height and curvature by turning the knob for improved seating comfort and driver performance.
Release the backrest catch by pulling the lever; adjust position and release lever to lock.
Swivel the seat freely right or left by pulling the locking lever; do not operate while driving.
Adjust the absorber setting using the lever (soft, medium, hard) to suit driving conditions.
Turn the seat heater on/off by pressing the switch; 0 for OFF, 1 for ON.
General| Model | MSG95G/721 |
|---|---|
| Suspension Stroke | 100 mm |
| Fore/Aft Adjustment | 210 mm |
| Product Type | Mechanical Suspension Seat |
| Material | Fabric |
| Adjustable Features | Height |
| Color Options | Black |
To Next Page
