Seat functions and operation
27
Swivel *
The swivel is released by pulling the locking
lever. It allows free swivelling of the driver's
seat to the right or left up to an end stop.
WARNING! Risk of accident!
Do not operate the locking lever for
swivel while driving.
After the adjustment, the locking lever
must latch into the desired position with an
audible click. It should not be possible to turn
the driver’s seat into another position after it
has been locked.
Absorber *
The absorber setting of the seat can be varied
to suit the on and off-road driving conditions.
The cushioning effect can be individually
adjusted for this purpose.
Turn the lever to the desired position and
release
1 soft
2 medium
3 hard
Position 2 is the basic setting recommended
by the manufacturer for an average driver's
Seat heater *
The seat heater can be turned on/off by
pressing the switch.
0 = seat heater OFF
1 = seat heater ON
* if fitted ** depending on model *** optional extra
To Next Page
Loading...
