Connecting via PoE
To connect the base station using PoE, you need to connect the Ethernet cable provided (or 3rd party
network cable) between the Network Socket on the base station to Ethernet port of your PoE switch/hub.
Setting up DP720 handset
Please follow below steps to insert batteries into the handset:
1. Open the battery compartment cover.
2. Insert the batteries in the correct polarity.
3. Close the battery compartment cover.
Note: Please charge the batteries fully before using the handset for the first time
Figure 5: Setting up the DP720
Battery Information
• Technology: Nickel Metal Hydride (Ni-MH)
• Size: AAA
• Voltage: 1.2V
• Capacity: 800mAh
• Charging time: 12 hours from empty to full
• Standby time: up to 250 hours
• Talk time: up to 20 hours’ active talk time
In order to get the best performance of your DP720 handset, we recommend using original batteries
provided in the package or batteries compliant with above specifications.
The specifications may differ depending on the age and capacity of the batteries used.
To Next Page
Loading...
Need help?
General
