To enable the call forward, please refer to the following steps:
1. Press Menu (left softkey or the selection key ) to bring up operation menu.
2. Access to Call settings and then to Call Forward sub-menu.
3. Select the account on which you want to enable/disable the call forward feature and press “Select”.
4. Select the type of call forwarding and enter the number to forward the calls, and then press “Save”
(left softkey ) to apply the settings, a prompt message will be displayed to confirm that the new
settings have been saved successfully.
Call transfer
The DP720 supports the call transfer feature, you can transfer a call to another party using one of the
following ways:
▪ Blind transfer: Transfer a call directly to another party without consulting
▪ Attended transfer: Transfer a call with prior consulting.
Blind Transfer
1. Press the “Options” softkey (Left softkey ) during a call, and then select Transfer.
2. The initial call will be on hold, enter the number you want to transfer the call to.
3. Press Dial key . The call is connected to the number or the handset you specified, and the LCD
screen prompts Call Transferred.
Attended Transfer
1. Press Left softkey “Options” during a call, and then select New call.
2. Choose the line and enter the number you want to transfer the call to, then press Dial key .
3. Once the second call is established, press left softkey “Option” and select Transfer.
Speed Dial
Speed dial allows users to perform single-digit dialing to predefined numbers. This feature is particularly
useful to speed up dialing frequently used or hard to remember numbers. A maximum of 8 speed dial
numbers is allowed. Allowed
To Next Page
Loading...
Need help?
General
