P a g e | 6
Figure 4: Change Admin Level Password
The password length must be between 6 and 25 characters. Strong password with a combination of
numbers, uppercase letters, lowercase letters, and special characters is always recommended for security
purpose.
User Management Levels
Two user privilege levels are currently supported:
• Admin
• User
Only Status and Basic Settings
Random password
available on the
sticker at the back of
the unit.
NOTES:
➢ It is recommended to keep admin login for administrator only. And user should be provided with
user level login only, if web UI access is needed.
➢ Change User Level Password upon the first login by following the below steps:
1. Access your GRP web UI by entering its IP address in your favorite browser.
2. Enter your admin password.
3. Go to Basic Settings → New User Password and Enter the new password.
4. Confirm the new password.
5. Press “Save” at the bottom of the page to save your new settings.
To Next Page
Loading...
Need help?
General
