P a g e | 14
Please find the icon indications below for different Presence Status (Starting from firmware 1.0.0.31):
Table 3: VPK Icon Indications on GRP26XX phones
Using Extension Boards and MPKs
Users have also the ability to set presence watcher on phone MPKs (Multi-purpose Keys), and connected
Extension Boards.
For MPKs configuration, similarly to the VMPKs configuration, you need to have a phone supporting
Physical Multi-Purpose Keys. For instance, GRP2614 is offering physical MPKs, and you can do the same
configuration for Presence Watcher. This is available on phone Web UISettingsProgrammable
KeysPhysical Multi-Purpose Keys.
Note: Using Physical MPKs, the Presence Watcher feature will be limited in comparison with VMPKs. The
six available Presence Statuses will have the following LED states when using MPKs:
Table 4: MPKs LED States
Users can also use Extension Boards for Presence Watcher configuration, the GRP2615 supports
Extension Boards (GBX20), the extension board configuration is available under web
UISettingsExtension Boards.
To Previous Page
Loading...
Need help?
General
