Jabra EHS, Sennheiser EHS.
• Advanced settings 🡪Upgrade
Check for upgrade by contacting the firmware upgrade server.
• Syslog
Configures Syslog level, Transport protocol and Syslog Server’s address.
• Security
Enables disables Web and SSH access.
• Alternative Firmware
Press softkey to switch between the dual firmware versions loaded to the phone. The phone will reboot with the
chosen version.
• Factory Reset:
Perform Factory reset to the phone. All device configuration and user data will be lost after factory reset.
• Ethernet Settings 🡪Internet Protocol
Selects Prefer IPv4 / Prefer IPv6 / IPv4 only or IPv6 only. The default setting is “IPv4 only”.
• IPv4 Setting
Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account ID and password; Configures static IP
address, Netmask, Gateway, Preferred DNS server.
• IPv6 Setting
Selects IP mode (DHCP/Static IP); Configures static IP address, IPv6 Prefix (64 bits), IPv6 Preferred DNS
server.
• VLAN Setting
Enables CDP/LLDP, Configures LLDP TX interval, Enables Manual VLAN Configuration, Configures Layer 2
QoS 802.1q (VLAN ID/Priority).
• Wi-Fi Settings (GRP2602W only) 🡪Wi-Fi
Enables/disables Wi-Fi;
• Wi-Fi Band
Choose Wi-Fi band (2G , 5G or 2G&5G).
• Wi-Fi Network
Scans and displays available Wi-Fi networks.
Messages
• Instant Messages
Displays received instant messages
• Voicemail
Displays voicemail message information in the following format: Normal/Urgent
Call History Displays Local Call Logs: “All” Calls / “Missed” Calls/ “Dialed” Calls/ “Answered” Calls.
Contacts
Contacts sub menu includes the following options:
• Local Phonebook
• Local Group
• LDAP
User could configure phonebooks/groups options here, download phonebook XML to the phone and search and
dial from the local phonebook and search and dial from LDAP phonebook.
Factory Functions
Factory Functions sub menu includes the following options:
• Audio Loopback
Speak to the phone using speaker/handset/headset. If you can hear your voice, your audio is working fine. Press
Return Softkey to exit audio loopback mode.
• Keypad/Led diagnosis
All LEDs will light up Press all the available keys on the phone. The LCD will display the name for the keys to
be pressed to finish the keyboard diagnostic mode. Press Hook button to exit.
• Certification Verification
Verify the certificate loaded on the phone.
Reboot Reboots the phone.
To Next Page
Loading...
