2. Phone found there is change(s) compared with the current setting on the phone (Any valid P-value change, no matter if it
does need reboot to apply or not).
3. The phone will update to the new setting (will not save P22421 itself) and will go into the normal reboot process (e.g.: if
there is an active call, the phone will wait until it is finished)
Second-time download:
1. After reboot, the phone may download the same config file again (if the config file path did not change).
2. Phone checked the config file and found there is no P-value needed to be updated.
3. The phone will not reboot again.
Figure 11: Certificates Files Download
For more details on XML provisioning, please refer to:
https://documentation.grandstream.com/knowledge-base/sip-device-provisioning-guide/
No Touch Provisioning
After the phone sends, the config file request to the Broadsoft provisioning server via HTTP/HTTPS, if the provisioning server
responds “401 Unauthorized” asking for authentication, the phone’s LCD will prompt a window for the user to enter username
and password. Once the correct username and password are entered, the phone will send the config file request again with
authentication. Then the phone will receive the config file to download and get provisioned automatically.
Besides manually entering the username and password in the LCD prompt, users can save the login credentials for the
provisioning process as well. The username and password configuration are under the phone’s Web
UI🡪Maintenance🡪Upgrade and provisioning page: “HTTP/HTTPS Username” and “HTTP/HTTPS Password”. If the saved
username and password saved are correct, the login window will be skipped. Otherwise, the login window will be popped up
to prompt users to enter the correct username and password again.
Note: (Certificates and keys provisioning)
Users can configure the phone to get all the needed certificates during boot up. Instead of putting the certificate/key content in
the text directly from the Web interface or uploading them manually, they can choose to provision them from the configuration
file by putting the URL in the P-value field of each certificate and/or key. (e.g., http://ProvisionServer_address/SIP-TLS-
Certificate.pem) The phone will then process the URL, search for the appropriate certificate/Key file, download it and then apply
it to the phone.
Note
On the latest firmware upgrade to version 1.0.3.83, the option to display upgrade prompt on LCD screensaver page was added
To Next Page
Loading...
