Grandstream Networks GRP260X Series - Saving Configuration Changes; Rebooting from Remote Locations; Configuration Guide; Status Page Definitions

When changing any settings, always SUBMIT them by pressing the “Save” or “Save and Apply” button at the bottom of the
page. If the change is saved only but not applied, after making all the changes, click on the “APPLY” button on top of the page
to submit. After submitting the changes in all the Web GUI pages, reboot the phone to have the changes take effect if
necessary (Most of the options do not require a reboot).
Saving Configuration Changes
After users make changes to the configuration, press the “Save” button will save but not apply the changes until the “Apply”
button on the top of the web GUI page is clicked. Or users could directly press the “Save and Apply” button.
Rebooting from Remote Locations
Press the “Reboot” button on the top right corner of the web GUI page to reboot the phone remotely. The web browser will
then display a reboot message. Wait for about 1 minute to log in again.
CONFIGURATION GUIDE
This section describes the options in the phone’s Web GUI. As mentioned, you can log in as an administrator or an end-user.
Status: Displays the Account status, Network status, and System Info of the phone.
Account: To configure the SIP account.
Phone Settings: To configure phone general settings, Call Settings, Ringtone, and Multicast Paging.
Network Settings: To configure network settings.
Programmable keys: Configures idle and call screen softkeys And the Multi-purpose keys settings for the GRP2604 only.
System Settings: Configures Time and Language settings, Security Settings, Preferences, TR-069.
Maintenance: To configure upgrading and provisioning, System Diagnostics, Outbound Notifications, and Voice
monitoring.
Application: Configures Web Service settings, Contacts, LDAP, and Call History.
External Service: Configures GDS Settings, Call Center, BroadSoft XSI.
Status Page Definitions
User Level User Password Web Pages Allowed
End User Level user 123
Only Status and Basic
Settings
Administrator Level admin
Random password available on the
sticker at the back of the unit.
Browse all pages
Status 🡪 Account Status
Account
Account index.
● For GRP2601/GRP2601P: 2 SIP accounts
● For GRP2602/GRP2602P/GRP2602W: 4 SIP accounts
● For GRP2603/GRP2603P: 6 SIP accounts
● For GRP2604/GRP2604P: 6 SIP accounts
SIP User ID Displays the configured SIP User ID for the account.