Service Status GUI, Phone and CPE service status.
System Information Download system information
User Space Shows the percentage of the user space used and the status of the Database
Core Dump
Shows the status of the core dump and the core dump files generated if any. It also gives the ability to generate
GUI/Phone core dump files manually.
Special Feature OpenVPN® Support: displaying if the phone supports OpenVPN®.
Account x 🡪 General Settings
Account Register
Account Active
Indicates whether the account is active.
The default setting is “No”.
Account Name The name associated with each account to be displayed on the LCD. (e.g., MyCompany)
SIP Server
The URL or IP address, and port of the SIP server. This is provided by your VoIP service
provider (e.g., sip.mycompany.com, or IP address)
Secondary SIP Server
The URL or IP address, and port of the SIP server. This will be used when the primary SIP
server fails
SIP User ID User account information, provided by your VoIP service provider.
SIP Authentication ID
SIP service subscriber’s Authenticate ID used for authentication. It can be identical to or
different from the SIP User ID.
SIP Authentication Password
The account password required for the phone to authenticate with the SIP server before the
account can be registered.
After it is saved, this will appear as hidden for security purpose.
Name
The SIP server subscriber’s name (optional) that will be used for Caller ID display (e.g., John
Doe).
TEL URI
If the phone has an assigned PSTN telephone number, this field should be set to “user=phone”.
A “user=phone” parameter will be attached to the Request-URI and “To” header in the SIP
request to indicate the E.164 number. If set to “Enable”, “tel:” will be used instead of “sip:” in
the SIP request.
Voice Mail Access Number
Allows users to access voice messages by pressing the MESSAGE button on the phone. This
value is usually the VM portal access number.
BLF Server Configures the BLF server (optional) used for SUBSCRIBE requests.
Account Display
When set to “Username”, the LCD will display the Username if it is not empty and when set
to “User ID”, the LCD will display the User ID if it is not empty.
To Next Page
Loading...
