Figure 6: Packet Capture in Idle
Users can also define whether RTP packets will be captured or not from With RTP Packets option.
When the capture configuration is set, press the Start button to start packet capture. The Status will become RUNNING while
capturing, as shown in Figure 7: Packet Capture when running. Press the Stop button to end capture.
Press the Download button to download the capture file to your local PC. The capture file is in .pcap format.
Figure 7: Packet Capture when running
UPGRADING AND PROVISIONING
Unified Firmware
The GRP2601 / GRP2601P / GRP2602 / GRP2602P /GRP2602W / GRP2603 / GRP2603P / GRP2604 / GRP2604P support unified
firmware for all GRP260X models.
Figure 8: GRP260X Unified Firmware
To Next Page
Loading...
