Service Settings
Sort Phonebook by Sort phonebook based on the selection of first name or last name.
BroadSoft Directory Update Interval
(m)
Configures the BroadSoft phonebook download interval (in minutes). If set to 0, automatic
download will be disabled. Valid range is 5 to 4320.
Broadsoft Contacts Download
Limitation
The maximum contacts that can be downloaded for each BroadSoft XSI server directory. The
valid range is from 0 to 2000. If set to 0, the server’s default contact limit will be used. If the
total contact records returned by the server is larger than this limit then it will not be
downloaded, and the device will be limited to remote search.
BroadSoft Contacts Search limitation
The maximum remote search records that can be downloaded for the BroadSoft XSI server
directory. The valid range is from 0 to 2000. If set to 0, there is no limit. If the search result
total records exceed this value, it will not be downloaded, and you will need to narrow the
search scope.
Network Directories
Type
Enable/Disable Broadsoft Network directories. The directory types are:
● Group Directory: Enable/Disable and rename the BroadWorks Xsi Group Directory
features on the phone. If keep the Name box blank, the phone will use the default name
“Group” for it.
● Enterprise Directory: Enable/Disable and rename the BroadWorks Xsi Enterprise
Directory features on the phone. If keep the Name box blank, the phone will use the
default name “Enterprise” for it.
● Group Common: Enable/Disable and rename the BroadWorks Xsi Group Common
Directory features on the phone. If keep the Name box blank, the phone will use the
default name “Group Common” for it.
● Enterprise Common: Enable/Disable and rename the BroadWorks Xsi Enterprise
Common Directory features on the phone. If keep the Name box blank, the phone will use
default name “Enterprise Common” for it.
● Personal Directory: Enable/Disable and rename the BroadWorks Xsi Personal Directory
features on the phone. If keep the Name box blank, the phone will use the default name
“Personal” for it.
● Missed Call Log: Enable/Disable and rename the BroadWorks Xsi Missed Call Log
features on the phone. If keep the Name box blank, the phone will use the default name
“Missed” for it.
● Placed Call Log: Enable/Disable and rename the BroadWorks Xsi Placed Call Log
features on the phone. If keep the Name box blank, the phone will use the default name
“Outgoing” for it
● Received Call Log: Enable/Disable and rename the BroadWorks Xsi Placed Call Log
features on the phone. If keep the Name box blank, the phone will use the default name
“Incoming” for it.
Name Defines the directory name.
External Service 🡪 E911 Service
Enable E911 Enable Enhanced 911 call. Default is disabled
HELD Protocol Configure HELD transfer protocol. HTTP or HTTPS
HELD Synchronization Interval.
The valid synchronization interval is between 30 to 1440 minutes. The synchronization is off
when the interval is 0.
Location Server Configure the primary Location Information Server (LIS) address
To Next Page
Loading...
