Assigns a function to the corresponding Softkey. The key mode options are:
• Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the
Value field to be dialed.
• Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active account.
For example, if the phone is off hook and account 2 is active, it will call the
configured Speed Dial number using account 2.
• Voice Mail
Select Account and enter the Voice Mail access number in the Value field.
• Call Return
The last answered calls can be dialed out by using Call Return. The Value
field should be left blank.
Also, this option is not binding to the account and the call will be returned
based on the account with the last answered call.
• Intercom
Select Account, and enter the extension number in the Value field to do the
intercom.
• LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP search
base in the Name field. It could be the same or different from the Base in
LDAP configuration under Advanced Settings. The Base in LDAP
configuration will be used if the Name field is left blank. Enter the LDAP
Name/Number filter in the Value field. LDAP search does not support
entering Non-ASCII characters
Assigns a function to the corresponding Multi-Purpose Key. The key mode
options are:
• Line
Regular line key to open up a line and switch line. The Value field can be
left blank.
• Shared Line
Share line for Shared Line Appearance feature. Select the Account
registered as Shared line for the line key.
The Value field can be left blank.
• Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the
Value field to be dialed.
• Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active account.
For example, if the phone is off hook and account 2 is active, it will call the
configured Speed Dial number using account 2.
To Next Page
Loading...
Need help?
General
