EasyManuals Logo

Grandstream Networks GXP1628 Administration Guide

Grandstream Networks GXP1628
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
GXP16XX Administration Guide
Version 1.0.4.100
P a g e | 66
UPGRADING AND PROVISIONING
The GXP1610 / GXP1615 / GXP1620 / GXP1625 / GXP1628 / GXP1630 can be upgraded via TFTP / HTTP
/ HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server and selecting a download
method. Configure a valid URL for TFTP or HTTP/HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
fw.mycompany.com
There are two ways to setup a software upgrade server: The LCD Keypad Menu or the Web Configuration
Interface.
Upgrade via Keypad Menu
Follow the steps below to configure the upgrade server path via phone's keypad menu:
1. Press MENU button and navigate using Up/Down arrow to select Config.
2. In the Config options, select Upgrade.
3. Enter the firmware server path and select upgrade method. The server path could be in IP address
format or FQDN format.
4. Press the "OK" softkey. A reboot message window will be prompt.
5. Reboot the phone to have the change take effect.
When upgrading starts, the screen will show upgrading progress. When done you will see the phone restarts
again. Please do not interrupt or power cycle the phone when the upgrading process is on.
Upgrade via Web GUI
Open a web browser on PC and enter the IP address of the phone. Then, login with the administrator
username and password. Go to MaintenanceUpgrade and Provisioning page, enter the IP address or
the FQDN for the upgrade server in "Firmware Server Path" field and choose to upgrade via TFTP or
HTTP/HTTPS. Update the change by clicking the "Save and Apply" button. Then "Reboot" or power cycle
the phone to update the new firmware. When upgrading starts, the screen will show upgrading progress.
When done, you will see the phone restart again. Please do not interrupt or power cycle the phone when
the upgrading process is on.
Firmware upgrading takes around 3 minutes in a controlled LAN or 5-10 minutes over the Internet. We
recommend completing firmware upgrades in a controlled LAN environment whenever possible.

Table of Contents

Other manuals for Grandstream Networks GXP1628

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GXP1628 and is the answer not in the manual?

Grandstream Networks GXP1628 Specifications

General IconGeneral
BrandGrandstream Networks
ModelGXP1628
CategoryIP Phone
LanguageEnglish

Related product manuals