FIRMWARE VERSION 1.0.6.11 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 16 of 81
For GXP2120/GXP2110/GXP2100/1450: 2.5mm and RJ9 headset jack;
For GXP140x: RJ9 headset jack only
Yes, 2-angle positions available
Layer 2 (802.1Q, 802.1p) and Layer 3 (ToS, DiffServ, MPLS) QoS
User and administrator level passwords, MD5 and MD5-sess based authentication,
256-bit AES encrypted configuration file, TLS, SRTP, 802.1X media access control
English, German, Italian, French, Spanish, Portuguese, Russian, Croatian, Simplified
Chinese, Traditional Chinese, Korean, Japanese, Svenska and etc
Firmware upgrade via TFTP/HTTP/HTTPS, mass provisioning using TR-069 or AES
encrypted XML configuration file
Power and
Green Energy
Efficiency
Universal power adapter:
Input: 100-240VAC 50-60Hz; Output: 5VDC, 800mA
(GXP2100 only) Input: 100-240VAC 50-60Hz; Output: 5VDC, 800mA or 5VDC, 1200mA
Integrated Power-over-Ethernet (Built-in auto-sensing: Cisco and IEEE 802.3af standard)
Max power consumption 2.5W (power adapter) or 3W (PoE)
251mm(W)
202mm(L)
77mm(H)
252mm (W)
210mm (L)
78mm (H)
222mm (W)
210mm (L)
93mm (H)
186mm (W)
210mm (L)
81mm (H)
186mm (W)
210mm (L)
81mm (H)
Operating
Temperature
and Humidity
32-104
o
F / 0-40
o
C, 10-90% (non-condensing)
GXP2120/GXP2110/GXP2100/GXP14xx phone, handset with cord, base stand, wall
mount spacers, universal power supply, network cable, quick start guide
FCC Part 15 (CFR 47) Class B; EN55022 Class B, EN55024, EN61000-3-2,
EN61000-3-3, EN60950-1; AS/NZS CISPR 22 Class B, AS/NZS CISPR 24, RoHS; UL
60950 (power adapter)