Grandstream Networks GXP2130 Series - EASY MODE CONFERENCE CALL

GXP2130 User Guide Page 5
• Initiate a conference call.
➢ Establish calls with 2 or more parties respectively;
➢ While 1 call is active, the other call will be put on hold with its LINE key blinking in green;
➢ Press CONF key;
➢ Press the desired LINE key on hold, the conference will be established;
➢ Repeat the previous 2 steps for all the other parties on hold to join the conference.
• Cancel Conference.
➢ If after pressing the CONF key, the user decides not to conference, press Cancel softkey
or the current active LINE key (LED in solid green);
➢ This will resume the 2-way conversation with the current line.
• Split and Re-conference.
➢ During the conference, press HOLD key. The conference call will be split, and the calls
will be put on hold separately with the LINE keys blinking in green;
➢ Select 1 LINE key and press to resume the 2-way conversation;
➢ If users would like to re-establish conference call, before 1 separate LINE is selected,
press the ReConf softkey right after the conference call is held/split;
• End Conference.
➢ Press HOLD key to split the conference call. The conference call will be ended with both
calls on hold; Or
➢ Users could press the End Call softkey or simply hang up the call to terminate the
conference call.
EASY MODE CONFERENCE CALL
GXP2130 supports Easy Conference Mode, which can be used combined with the traditional
way to establish the conference.
• Initiate a conference call.
➢ Establish 1 call;