GXP2130 User Guide Page 6
➢ Press CONF key and a new line will be brought up using the same account;
➢ Dial the number and press SEND key to establish the second call;
➢ Press CONF key or press the ConfCall softkey to establish the conference.
• Join more parties in established conference call.
➢ Establish conference call;
➢ Press CONF key and a new line will be brought up using the same account;
➢ Dial the number and press SEND key to establish the second call;
➢ Press CONF key or press the ConfCall softkey to join the new party in the established
conference.
• Split and Re-conference.
➢ During the conference, press HOLD key. The conference call will be split and both calls
will be put on hold separately with 2 LINE keys blinking in green;
➢ Select 1 LINE key and press to resume the 2-way conversation;
➢ If users would like to re-establish conference call, before 1 separate LINE is selected,
press the ReConf softkey right after the conference call is split.
• Cancel Conference.
➢ If users decide not to conference after establishing the second call, press EndCall softkey
instead of the ConfCall softkey/CONF key;
➢ This will end the second call and the screen will show the first call on hold.
• End Conference.
➢ Press HOLD key to split the conference call. The conference call will be ended with both
calls on hold; Or
➢ Users could press the EndCall softkey or simply hang up the call to terminate the
conference call.
Note:
• The party that starts the conference call has to remain in the conference for its entire
duration, you can put the party on mute, but it must remain in the conversation. Also,
this is not applicable when the feature "Transfer on Conference Hang-up" is turned on.
• The option "Disable Conference" has to be set to "No" to establish conference.
To Next Page
Loading...
