P a g e | 79
GXP21XX User Guide
Version 1.0.9.108
Note:
The party that starts the conference call must remain in the conference for its entire duration, you can
put the party on mute, but it must remain in the conversation. In addition, this is not applicable when
the feature "Transfer on Conference Hang-up" is turned on.
The option "Disable Conference" must be set to "No" to establish conference.
Conference Event Indicator (CEI)
Regular Conference Room
If CEI is detected, there will be a new tab called “CEI” next to “INFO”. Pressing the “Menu” hard
key will switch between the tabs.
In the CEI tab, conference events will be shown chronologically (as shown below).
Figure 58: Conference Event Indicator
A “ConfRoom” softkey should also appear to access the list of conference room users (as shown
below).
Figure 59: List of Conference Room Users