Figure 9: Landscape Screen Warning
DISABLE DIALER WHEN USING MIRCROSOFT LYNC
®
When using Microsoft Lync
®
application or other third party applications that utilize audio from the handset,
it is recommended that the automatic dialer is disabled. Disabling the dialer will ensure that when the
handset is picked up, the dialer will not appear on screen during the use of Microsoft Lync
®
application or
other applications.
1. From the home screen, toggle the screen to access System Settings by sliding your finger down over
the screen.
2. The Handset icon will indicate that it is Enabled.
3. Click the Handset icon to switch to Disabled to always disable the dialer when an application is open,
or click the Handset icon twice to switch to Auto, which will only disable the dialer when an
application is requesting access to audio.
To Next Page
Loading...
