Grandstream Networks GXV3611 User Manual

GXV3611 Mini IP Dome Camera
Firmware 1.0.4.6 Page 29 of 34
Grandstream Networks, Inc. 09/2010
GXV3611 Motion Detection Page
The GXV3611 supports Motion Detection. To utilize this feature, please follow the below
steps:
1. Setup the motion detection monitored area.
2. Configure the motion detection time schedule.
3. Configure alarm action properly.
Setup Motion Detection Monitored Area
Enable Motion Detection – If this option is selected, motion detection will be enabled. If
something/somebody moves in the motion detection region, an alarm will be triggered.
Show Motion Detection Regions – If this option is selected, the motion detection regions
will be displayed on the screen with a white border.
To Edit a Monitored Area
1. In the Select a Region dropdown list, select
the region ID.
2. Click Edit.
3. Click on the video, drag and draw you
preferred area.
4. Set the Sensitivity. Click the Save button to
save the sensitivity.
NOTE: The Sensitivity value varies from 0 to
100. The larger the value is, the higher the
sensitivity.
Button to save sensitivity
only
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm center
is checked for Alarm Actions, the
white border will flash red when a
motion detection alarm is triggered.

Grandstream Networks GXV3611 Specifications

General

Brand	Grandstream Networks
Model	GXV3611
Category	IP Camera
Language	English