EasyManuals Logo
Home>Grandstream Networks>Gateway>GXW4232

Grandstream Networks GXW4232 User Manual

Grandstream Networks GXW4232
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
P a g e | 26
GXW42xx User Manual
Version 1.0.15.30
2. Or, you may dial the number directly and press # (Use # as dial keymust be configured in web
configuration).
Examples:
1. Dial a number (e.g. (626) 666-7890), first enter the prefix number (usually 1+ or international code)
followed by the phone number. Press # or wait for 4 seconds. Check with your VoIP service
provider for further details on prefix numbers.
Direct IP Calls
Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another VoIP Device, to
talk to each other in an ad hoc fashion without a SIP proxy.
Elements necessary to completing a Direct IP Call:
1. Both GXW42XX and other VoIP Device, have public IP addresses, or
2. Both GXW42XX and other VoIP Device are on the same LAN using private IP addresses, or
3. Both GXW42XX and other VoIP Device can be connected through a router using public or private
IP addresses (with necessary port forwarding or DMZ).
GXW42XX supports two ways to make Direct IP Calling:
Using IVR
1. Pick up the analog phone then access the voice menu prompt by dial “***
2. Dial “047to access the direct IP call menu
3. Enter the IP address using format ex. 192*168*0*160 after the dial tone.
Using Star Code
1. Pick up the analog phone then dial *47
2. Enter the target IP address using same format as above.
Note: NO dial tone will be played between step 1 and 2.
Destination ports can be specified by using *(encoding for “:”) followed by the port number.
Examples:
a) If the target IP address is 192.168.0.160, the dialing convention is
*47 or Voice Prompt with option 047, then 192*168*0*160 followed by pressing the “#” key if it
is configured as a send key or wait 4 seconds. In this case, the default destination port 5060 is used if no
port is specified.

Table of Contents

Other manuals for Grandstream Networks GXW4232

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GXW4232 and is the answer not in the manual?

Grandstream Networks GXW4232 Specifications

General IconGeneral
BrandGrandstream Networks
ModelGXW4232
CategoryGateway
LanguageEnglish

Related product manuals