WEB UI/SSH ACCESS
Web UI Access
The WP810 embedded web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow users to configure the device through a web browser such as Microsoft IE, Mozilla Firefox,
Google Chrome and etc. With this, administrators can access and configure all available WP810 information
and settings. It is critical to understand the security risks involved when placing the Cordless Wi-Fi IP
Phones on public networks and it’s recommended not to do so.
Web UI Access Protocols
HTTP and HTTPS are supported to access the WP810’s web UI and can be configured under web UI →
Maintenance → Security settings → Security.
To secure transactions and prevent unauthorized access, it is highly recommended to:
1. Use HTTPS instead of HTTP.
2. Avoid using well known port numbers such as 80 and 443.
Figure 1 : Web UI Access Settings
3. The WP810 allows access via SSH for advanced troubleshooting purpose. This is usually not
needed unless the administrator or Grandstream support needs it for troubleshooting purpose. SSH
To Next Page
Loading...
