Grant 20 Series - Setting Up a Wireless Ethernet Logger; Wireless Setup Prerequisites and Initiation

Version 1 - December 2009 29486
Page 12
www.grant.co.uk
5. Setting Up a Wireless Ethernet Logger
Prerequisites
Before proceeding with the installation you will require the following.
- A 20xx Data Logger with wireless Ethernet and external Power Supply
- A wireless router that is either connected to a Network or direct to the PC
- Before proceeding you must speak to your network administrator to get the following
information regarding the network you will be connecting the SQ20xx logger to
 Network SSID Name
 Network Channel Number
 Network Encryption Key
5.1 Configuring the Wi-Fi connection
Attach the logger to the PC via USB and click on the Communication Wizard button in the
SquirrelView software.
Choose the Ethernet (wired / wireless) option and click Next.