Version 1 - December 2009 29486
Page 4
www.grant.co.uk
2. Setting up the 20xx IP Address
2.1 SQ20xx Discovery
The 20xx Discovery program will allow you to find and select the 20xx logger(s) to be setup.
To run:
1. Use the Find Device button within the Communication wizard of the Squirrelview soft-
ware or go to the following directory:
a. \Program Files\SquirrelView\Tools\SQ20xx_Ethernet
And double click on the file Finder.exe. The 20xx Discovery program should appear as
below after completing a search for connected 20xx loggers.
Next click on the logger you wish to configure in the list of devices:
To Next Page
Loading...
