22
Optional Parts
Perforating Wheel
The top and bottom output rollers can be used to install accessories such as
perforating blades. Up to four sets of perforating wheels can be installed onto one
machine.
There are two perf blades within the perforation blade assembly kit. Two lower
knives, four M3*10 Allen screws and four M3*6 Allen screws. You will need a 2mm
and a 2.5mm Allen key (provided) to complete this installation.
To install this perforation blade kit on your PT 331S creaser; remove the safety
cover, you will see the exit shaft with four rubber exit wheels matching with four
metal exit wheels. The perf blade kit will be installed onto these exit wheels.
To Next Page
Loading...