9
A password can be set to device to cancel the key lock.
(No password is set at factory default.)
<Operation Flow>
1. Set the password.
Press the , , and ENTER keys at the same time to display the password setting screen
shown below. Specify a four-digit password.
Use the , ,
,
keys to select numbers and press the [ENTER] key to fix the
password.
In case you forgot your password, please contact us to acquire the master password.
2. Set the key lock operation.
Hold down the and keys together for at least two seconds.
3. Cancel the key lock.
Hold down the and keys together for at least two seconds.
The password setting screen shown below will be displayed. Set a password.
Entering an incorrect password will not unlock the key lock.
Key lock status will be retained when power is turned off.
15. Key lock release with password
To Next Page
Loading...
